What are the tire beds: instructions for making

Why choose tires for flower beds

Finding a few old car tires is easy, even if the household doesn't have a car. It is the availability and durability of this material that became the main reason for the popularity of such a direction of country applied art as flower beds from car tires. It is easy to work with them, and the older and worn-out rubber comes across, the easier it is to cut and turn it inside out.

Tires calmly relate to temperature extremes, they are not afraid of either winter frosts or summer heat. In summer, under the scorching rays of the sun, the ground inside the black rubber base can overheat, the plants are unlikely to like this, so it would be better to paint the tires in light colors. Painting will protect the flower bed from overheating and make it more attractive. Tires become protection for trees and bushes grown inside them when the lawn mower is working in the country or in the garden. For the same purpose, they are often used in city yards, where it is difficult to grow a young tree or bush.

Video "A selection of different ideas and options for summer cottages"

Video selection of various interesting ideas for summer cottages.

Types of flower beds from old tires

All flower beds that are made using old tires can be divided into two types: whole and cut. In the first case, you just need to clean them of sand and dirt, wash, paint, install in the right place, pour soil, plant flowers. It is very important not to forget to make a drainage layer of gravel, expanded clay or something similar, otherwise excess moisture will remain, the plants will not be able to grow due to rotting roots.

Whole tires are installed separately, in groups, in one plane or in several tiers. They make low (single) or high (from several tires placed on top of each other) flower beds, varying different in diameter or height. They are installed on the ground or on special stands, even hung on walls and trees. And you can cut out certain figures from tires, turn them inside out, make unusual flower beds in the form of famous animals or fantastic creatures. Using a knife and strong hands, an old wheel is turned into a luxurious flower vase on a stand. Fancy figures are made from old tires to decorate the yard or garden.

Flowerbed-pyramid

If you have the opportunity to acquire tires of different diameters, then you can make a wonderful flower bed in the form of a pyramid out of them. This is an excellent vertical solution for a flower bed if there is very little space in the country. Tires must be stacked on top of each other, starting with the largest, painted with paints in bright joyful colors. Of course, you will get a flowerbed only if the difference between the diameters is at least 20 cm. It is this difference that is planted with plants, and from the second tier you can use ampelous plants hanging down beautifully.

If there are only tires of the same diameter, only 6 of them are needed.In this case, the pyramid is made by folding the tires in three levels: 3 - for the first row, 2 - for the second and 1 - at the very top. Such a flower bed takes up very little space, is clearly visible from all sides, it is filled with a variety of flowers and ornamental plants.

When in the country house or in the garden there is a place to lay out a flower from 5 tires, then you can make an even more voluminous and beautiful flower bed-pyramid. The 5 tires of the lower row become the base, 3 are laid out on top of them and one more on top. Such a flower bed can be seen from afar from all sides, it can be made gentle chamber or brightly spectacular - it all depends on the choice of plants and the coloring of tires.

Hanging flower garden

If the dacha has a blank wall or a strong fence, the flower garden can be placed on them by hanging tires. The space inside is filled with soil, ampelous plants are planted, which will completely transform this place. You just need to think about drainage: put small pebbles and sand down, drill rubber so that there is a place for excess water to drain.

You can hang the tire on a tree or a special support with a chain, close the bottom with rubber or plywood with drilled holes, fill in the ground, plant flowers. But such a structure will be very heavy, water will drip from the bottom - this is not acceptable everywhere, although it may look very impressive. It will be easier to use the tire as a stand or flowerpot by placing flowerpots with pallets in it - it is not so hard, the pallets will keep excess moisture. This option is placed on verandas or walls of gazebos.

Other interesting ideas

The tires can be folded and painted so that a funny frog of 3 tires (some more plastic for the legs and eyes), a serious turtle from 1 whole and 1 cut tire will settle in the garden or in the country. You can make a composition from cups and a teapot. For her, in addition to the main material, you will also need a pipe for the spout of the kettle, a metal tape for the handles. The appropriate paint and thoughtful selection of plants will complete the wonderful decoration of the cottage. Paint and a little plastic (bottle) will be needed so that a large snake curls up in a secluded corner, between the rings of which ornamental grasses will break through.

If you have a sharp knife, imagination, determination to cut rubber, then you can make even more amazing flower beds. A pattern is drawn on the tire with chalk, then the rubber needs to be cut, turned inside out - as a result, you will get a wonderful flowerpot or even an elegant figure of a swan, a parrot or an absolutely fantastic bird of paradise. Cutting a tire is not difficult, the main thing is to have a sharp knife. For eversion, physical strength is required. The creativity of the craftsmen is embodied in fairy-tale characters, so bright snowmen, funny robots, Baba Yaga in a mortar or dragons harnessed to carts appear in the courtyards.

Step by step manufacturing

Figures of swans that decorate courtyards or playgrounds are very popular, but at the dacha I want to arrange as many flower beds as possible, so today it makes sense to talk about how to make a swan flower bed. Such a swan can be made in 1 hour, with effort and caution: rubber is elastic, cutting, and even more so turning it out is not too easy. Step-by-step instructions will help you cope with this quickly and at the lowest cost. In addition to the main material, you will need such things: a jigsaw, a grinder, wire (for the stability of the neck), paint of two colors (white or black - for the swan itself, red - for the beak).

First you need to choose a tire, preferably an old, bald one - it is easier to cut it, without a metal cord. Then you need to draw a diagram, apply it to the tire itself. After that, you need to make cuts along the lines for the head, neck, tail and wings. Cutting with a jigsaw takes longer, but the grinder will melt the rubber and add an unpleasant odor. Now you need to turn the tire inside out - this will have to be done very carefully so as not to damage the rubber.The beak is made of plastic, rubber, plywood - whatever is at hand is painted red.

The two halves of the head are folded together, bending the cord for this, insert the beak, secure with self-tapping screws, they are also inserted into the place of the eyes. The head needs to be raised to give it the desired position, you will have to slightly press it into the wheel. You will get a kind of fold, which is fixed with self-tapping screws. Now all that remains is to paint the swan with paint, make a flower garden in place of its back, and let it sail across the expanses of the lawn. Several of these flower beds look organic near a decorative reservoir. You can make a composition of a white swan with white flowers on the back, a black swan with dark herbs (or dark pansies) and a blue tire planted with blue plants. If you want to make a swan figurine, and not a flower bed, you will have to cut more, and then carefully cut the cord along the edge.

Video "Options for flower beds"

Various indicative options for ready-made flower beds.