Characteristics of the greenhouse Harvest and its assembly
Content
Design features
Greenhouses from the "Harvest" series, in essence, are a greenhouse, only of a smaller size. As a coating, material SUF-42 with an ultraviolet stabilizer is used (the porous structure of the material promotes the exchange of moisture and air, which prevents plants from suffocating or getting wet), polycarbonate or a thermally bonded fabric.
The frame of the structure is made of galvanized metal or plastic pipes, which take any shape, depending on the terrain and the given conditions. The increased strength of the plastic is complemented by a low susceptibility to deformation from corrosion. Such a greenhouse-greenhouse is a good choice for vegetable gardens where there is no necessary space for installing a large greenhouse. When harvesting, the bed is simply freed from the structure.
Those models that are covered with a canvas can be easily freed from the coating in order to water or fertilize the plants. Larger models are equipped with doors and vents for easy access. The advantage of such greenhouses and greenhouses is that the height, length and width of the frame can be easily changed.
Pros and cons
It should be noted that the greenhouse-greenhouse of the Harvest series is a miracle both in terms of design and construction. Besides:
- At the slightest contamination, you can remove the coating, wash it in the washing machine and return it back.
- It is possible to order a cellular polycarbonate cover.
- The structure itself is durable due to its simple and flexible frame.
- When collected, the miracle greenhouse does not require special skills or tools.
- The labile fastening system allows you to change the dimensions according to your wishes.
The only drawback of the miracle greenhouse is the ease of construction. It is necessary to attend to the foundation or reliable fasteners so that the gust of wind does not carry it off the garden.
The lineup
Any product that is popular sooner or later acquires different models in order to satisfy the needs of the consumer. Wonderful greenhouse "Harvest" was no exception. The range of models is rich and will really suit any gardener's request: PC, Elite, Classic, Absolute, Elite-Absolute, Udachny.
Harvest PC
The greenhouse of this model is based on a galvanized steel profile with a thickness of 0.8 mm, each module is additionally reinforced for greater structural strength. There is a doorway - 90 cm wide. The standard size is 400 × 300 × 215 cm. It implies additional vents for ventilation of the room.
Vintage Classic
It differs from the wonderful greenhouse "PC" with a gable roof. The frame for this model is galvanized pipes, and the greenhouse itself consists of a series of 2-meter modules. The set includes 2 doors and vents. Suitable for most garden plants, can be easily installed anywhere on the site.
Harvest Absolute, Elite and Elite-Absolute
Greenhouse "Absolute" is a good choice for those who like reliable, heavyweight structures.The basic set of this model includes 2 doors and vents. Additional stability is provided by digging in the frame, which eliminates the need to erect a foundation. The garden bed will remain untouched.
Miracle greenhouse "Elite-Absolute" is based on a galvanized steel frame, each pipe of which is 25 mm in diameter. Unlike other models in this series, you will need self-tapping screws to secure the frame. The greenhouse is also dug in, while the exposure to sunlight does not harm either the coating or the pipes.
Greenhouse "Elite" has a standard size of 400 × 300 × 210 cm, but the width and height can be easily adjusted depending on your needs. The frame also consists of galvanized steel pipes, 2 doors and vents. As well as "Elite-Absolute" for installation you will need screwdrivers and self-tapping screws.
"Lucky Harvest"
The last model on the list is a wonderful greenhouse, with which the garden will take on a healthy and lush look. There are three types on sale, depending on the length and number of arcs: 4 m, 5 arcs; 6 m, 7 arcs; 8 m, 9 arcs. Weight ranges from 2.2 kg to 2.8 kg. The basis of the frame is made up of rigid polymer plastic pipes with a diameter of 2 cm. The greenhouse does not need to be fixed on the foundation - you just need to dig the legs into the ground. The cover is a thermally bonded fabric that can be freely moved along arcs or removed for washing.
Video "Greenhouse from the V-shaped profile Harvest-PC-4"
In this video, the author talks about the assembly and operation of the PC Harvest greenhouse.
Mounting
Installation of any model does not require special knowledge or skills, and special equipment is also not required. Before installing the wonderful greenhouse, unpack it, carefully read the instructions, and then lay out the components so that it is convenient for you to take them. You will need a screwdriver, hammer, screwdriver, and a handful of self-tapping screws.
Dig the T-legs into the ground to a depth of 26-30 cm (if you don't want to build an additional foundation or the bed is already planted with plants). Start covering the frame with material. The polycarbonate is fixed with the transparent side up using mounting tapes. The thermally bonded fabric is pulled onto the frame, like curtains on a cornice, or fixed with special clips.
Once the installation is complete, compact the ground well around the legs to add more stability to the structure. That's all, the miracle greenhouse is ready to use.
Video "How to Harvest a Greenhouse"
Video tutorial on the assembly of the greenhouse "Harvest".