Choosing an electric lopper: tips and tricks

Types of tools

In principle, the lopper is similar to a pruner or scissors. The main advantage of the tool is the presence of adjustable handles, which make it possible to cut branches at high heights without using a ladder, as well as in hard-to-reach places. In addition, electrically powered tools allow you to cut thicker branches (5-10 cm in diameter) and do your gardening work dozens of times faster.

First of all, I would like to mention the bar lopper. This tool is equipped with a comfortable grip, after working with which you will not feel fatigue in your hands. It also helps activate the powerful cutting gear mechanism. Therefore, if you need to remove rather thick branches at the height and tops of trees in your garden, give preference to the barbell model.

High-altitude telescopic loppers are designed to cut branches at fairly high heights, which is why they are often called "pole pruners". The length of the telescopic handle is adjustable. It can be folded for easy storage. Thanks to the "extension", the radius of work is significantly increased. As much as possible, you can reach tree branches at a height of up to six meters. And also, such a design is very convenient, because a kind of lever is created, the gardener can spend less effort to trim branches and branches. A special ratchet mechanism will help minimize effort and improve cut quality.

Some telescopic models are equipped with a saw that is powered by electricity.

Another kind are tools for pruning low branches. Such electric pruners have rather short but comfortable handles.

Video "An example of the work of the Pole Cutter"

See how easy and fast it is to operate the Ryobi telescopic handle tool.

Features of use

Each tool has its own characteristics when used. As for the delimber, you need to use it like ordinary garden shears. The differences are in the size and length of the handles. This becomes a huge advantage, since you don't have to put in a lot of effort to get the desired result. To cut off a knot, it is worth clamping it between two blades and squeezing the handles of the tool. This will pull the sharp blades together and cut the branch.

The features of use also depend on what type of blades your tool has. If the bar lopper has flat blades, it will work in the same way as a scissor. This means that the knot will be surrounded by blades on both sides, which will cut it, doing it neatly. There will be no harm to the tree from such a technique.

The opposite type has contact blades. Their principle of operation is as follows: the blades are in the same plane, the branch is at the junction of two blades and, thus, is cut off due to pressure.

Electric loppers need a power supply to operate.Therefore, you will have to take care of the availability of an outlet and possibly an extension cord. In order to have freedom of movement in the garden, it is better to give preference to a rechargeable device. True, there is one caveat: they cannot be powerful enough, and in this, of course, they are inferior to their gasoline counterparts. So keep in mind, electric models can be used mainly for short-term gardening.

It is worth noting that almost all loppers are equipped with a special switch with protection against accidental starting of the tool. This is important because the chain speed is quite high - an average of 2.3 m / s.

Specifications

The garden lopper has several important technical characteristics that describe it in full. It is designed to cut branches and limbs from fairly tall trees. This tool looks like a pruner. Its purpose is also similar. It differs from pruning shears and garden shears in the presence of long handles. It is considered to be one of the largest tools for cutting branches and twigs.

Let's take a look at the technical characteristics using the example of an average tool. The voltage will be 220 V. The power of such a tool is 550 watts on average. Typically, the length of the knife will be approximately 150 mm. Weight up to three kilograms. It is made easy so that working with it is not difficult. However, such a weight of the device can make it difficult for a woman to use it for a long time. Knife type can be either one-sided or double-sided.

Choice based on goals

In order to choose the right tool for pruning trees, you need to first decide for yourself several important questions. This should be done before buying, if you do not want the new instrument to be idle due to the fact that it did not suit you for some reason.

Consider which tree should be processed, what type, and also see what the diameter of the branches is. These facts must be taken into account in order to understand which model of power is worth purchasing.

For example, for young trees where the wood is still green, flat blades are best. They look like scissors and work in the same way. No special effort is required to cut young branches.

For tougher and older trees, pruning loppers with contact blades are ideal. In addition, they are recommended for cutting dead branches. When the two blades are opposite each other, there will be less pressure on the bark. Thus, the plant will be minimally injured.

The action of the blades consists in a strong downward pressure on the wood. The blade holds the wood, applying pressure evenly until the end of the cutting motion.

Video “Review: The Best Electric Lopper”

We offer you a video review of the Black & Decker brand garden tool for pruning branches and branches, prepared by the Robotun online store.